A.Y. Boosters
Meet the world's most intelligent, yet simple boosting system. Designed to meet virtually all boosting applications – there's a model for your specific needs. Click on the model name below to learn more.
Residential
The residential booster can be run in three different modes, based on your boosting needs. In Pressure Mode, the pump starts with pressure drop and stops on low flow. In Flow Mode, the pump starts and stops by sensing flow. In Conservation Mode, the pump only operates during a peak demand, such as when multiple showers, bathtubs, or irrigation systems are running.
Instruction Manual 3 Light Prior to 1-17
Instruction Manual 4 Light After 1-17
E-Series
A.Y. McDonald’s E-Series DuraMAC™ Water Pressure Booster System is ideal for residential, irrigation, or light commercial applications. This pump comes complete with easy set-up instructions, all metal connections, a half-gallon pressure tank, and the inclusion of a check valve. In addition, experience a quiet operation due to the TEFC single phase motor, along with extra security because the electronics are separated and sealed from the waterway. Designed to shut off when no flow is detected, the E-Series DuraMAC™ Water Pressure Booster System gives that extra boost that you (and your water pressure) have been waiting for!
Light Commercial
The light commercial / irrigation boosters can be run in three different modes, based on your boosting needs. In Pressure Mode, the pump starts with pressure drop and stops on low flow. In Flow Mode, the pump starts and stops by sensing flow. In Conservation Mode, the pump only operates during a peak demand, such as when multiple showers, bathtubs, or irrigation systems are running.
Installation Instructions 3 Light Prior to 1-17
Installation Instructions 4 Light After 1-17
Commercial
The commercial booster may be run in Pressure Mode, where the pump starts with pressure drop and stops on low flow. It may also be run in a conventional Pressure Switch Mode, where the pump starts and stops on pressure.
Industrial
A.Y. McDonald’s new DuraMAC Variable Speed Booster is a stainless steel pump that adjusts its speed based on the demand of the system, maintains a constant pressure, and is easy to install. The motor provides quiet operation, at optimal working capacity. Click on the information below to learn more about the most intelligent, yet simple, pressure boosting system on the market.
Installation Instructions (1.5 - 3 HP) 2-20, 3210-652 - 2/20
Installation Instructions (3 - 10 HP) 3-18, 3210-552 - 3/18
Quick Start Guide (1.5 - 3 HP) 3-20, 3210-651 - 3/20
Quick Start Guide (3 - 10 HP) 3-18, 3210-555 - 3/18
Submittals Dropdown (1.5-3 HP)5-20
Submittals Dropdown (3-10 HP)8-14
WARNING: It is unlawful in CALIFORNIA, VERMONT, MARYLAND, LOUISIANA and the UNITED STATES OF AMERICA to use any product in the installation or repair of any public water system or any plumbing in a facility or system that provides water for human consumption if the wetted surface area of the product has a weighted average lead content greater than 0.25%. This prohibition does not extend to service saddles used in California, Louisiana or under USA Public Law 111-380.